The InkJet Stencils Printer Ink developed by TatuYou is a patented methyl violet formula here to take stencil printing to a whole new level.
Each 4oz bottle of InkJet Printer Ink is your key to printing approximately 3,000 vibrant tattoo stencils, bringing your cost per stencil down to an astonishing 10 cents. Say goodbye to expensive and time-consuming hand-drawn stencils, and say hello stunning tattoo stencils printed at up to 5,000 dpi resolution. Just two bottles are all you need to fill all four tanks of your Epson EcoTank Stencil Printer, providing uninterrupted, worry-free printing.
Whether you're a tattoo artist seeking unparalleled precision or a tattoo shop owner looking to improve overall efficiency in your business, our InkJet Stencils Printer Ink is the ultimate solution.
The InkJet Stencils Printer Ink is only available in single 4oz. bottles. Purchasing this item will fill HALF (½) of your Epson EcoTank Stencil Printer (2 of the 4 tanks). This stencil printer ink is compatible with any Epson EcoTank Printer. You must use a new printer, you cannot use an existing printer.
Printer is not included.
Getting Started - Your Step-by-Step Guide to Printing Perfect Tattoo Stencils:
- Take the printer out of the box and keep the instruction guide. DO NOT power up the printer until you have filled the ink tanks.
- Put gloves on to avoid staining your hands. Open the cover of the printer for all four ink tanks and remove dispensing caps from all 4 colors Epson ink bottles.
- Open the InkJet Stencil Ink and carefully pierce the foil seal with a pin or small pointed object.
- Place Epson dispensing cap on the InkJet Stencil bottle over the foil with black rubber washer in place.
- Dispense the ink in all four tanks with the intention of distributing it evenly, 1 oz in each tank. Each ink tanks has a mating dispensing cap that connects to the port to minimize spillage. Four ounces will not fill all tanks but will print about 3,000 stencils.
- Plug in the printer and turn it on and initiate the startup process.
- Connect the printer to your internet network. You can send files to the printer from your wireless device over the WIFI network. Connect the printer to your computer with a USB cable if your computer has a USB port. USB Cable is not supplied with the printer.
- Start printing stencils!